Network
Networkd
Service: network-setup.service
This service is responsible for managing the different network interfaces attached to the gateway, and automatically attach them to one of the following networks:
Public: NICs connected to the rest of the world * Criteria: Ethernet NICs that already have an IP address set
Private (bridge): NICs connected to the test machines * Criteria: Ethernet NICs that do not have an IP address set
Management (bridge): NICs connected to support hardware (such as PDUs), and administrators (wireguard) * Criteria: WiFi NICs, and user-configured NICs
Configuration
It is possible to override some of networkd’s automatic decisions by setting
the following environment variables in /config/config.env:
NET_MGMT_STATIC_ALLOC=: A comma-separated list of the MAC addresses of NICs that should be attached to the management network
Ddclient: dynamic DNS
Service: ddclient.service
Most CI-tron instances are likely to be hosted on dynamic IP addresses. This service allows users to setup dynamic DNS, so as to always be able to connect back to their gateway.
Configuration
The configuration file for the service is located at /config/ddclient/ddclient.conf.
You may base its content on the upstream sample configuration file located at
/etc/ddclient.conf, then refer to the official documentation
for more details.
Once you are done editing the configuration, restart the service systemctl restart ddclient.
WireGuard VPN
Service: wg-quick@wg0
CI-Tron provides built-in support for the WireGuard VPN access to the gateway.
The /config/wireguard/wg0.conf file provides configuration for the service.
By default it uses port 51820 and a keypair which is generated per machine
and stored under the same directory.
In order to enable access to the gateway, add the Peer section to the
mentioned config file:
[Peer]
PublicKey = your-public-key-in-base64-format============
AllowedIPs = 10.42.100.2/32
After that restart the service by running systemctl restart wg-quick@wg0.